Get the Most from Your Guitar Tech by “Speaking Repairman”
HOW MANY TIMES have you thought, “Where is that buzz or rattle coming from?” Not the normal fret buzz that we all know and hate, but a more mysterious buzz. Before we go further, let’s define our terms. Buzzes can be mechanical (frets, hardware, etc.) or electronic (shielding, wiring, 60-cycle pickup hum, etc). We’re going to look at mechanical buzzes first, and we’ll discuss electronic buzzes next month.
A customer brought in a semi-hollow guitar last week that made an annoying sitar sound when any C note on the instrument was played. The strings come out a hole in the trapeze tailpiece, and the length of string behind the bridge on the low E string happened to be tuned to a C. This caused it to vibrate sympathetically against the tailpiece when any other C was played. I ended up putting a 1" piece of heat shrink around the string at the ball end and that took care of it. I recommend weaving a strip of felt or leather through the strings between the bridge and the tailpiece on any guitar that has unwanted string vibration.
Along the same lines, one of the most common buzzes happens behind the note you are fretting. This is easy to find by dampening the strings behind where you fret the note. Pro fixes include a fret level, or raising or lowering the nut. At home, you can try a slight trussrod adjustment.
First, be sure the saddle retainer wire is not hitting the string. Then, try removing the saddle, cleaning out the area it sits in, and reinstalling it. You can also try a drop of the weaker blue Loctite, a drop of nail polish, or even a drop of wax to keep the saddle and screw from vibrating.
While looking for a sympathetic rattle, I once found the capacitor that spanned from the Volume to the Tone pot on a Gibson ES-175 had its own resonate frequency that vibrated along with certain notes.
Mysterious acoustic-guitar buzzes are often a loose brace. Lightly tap the top or back of the guitar like a bongo. The sound will go from a nice drum sound to a thud when you tap near a loose brace. Unless you’re super handy, however, fixing this buzz typically requires a shop repair.
There is a moral to this story: If you can describe the problem accurately and reproduce the problem quickly, it makes it easier, faster, and cheaper to find and fix. This may mean more time at home experimenting with your guitar, but that is far more effective than coming into a repair shop, and asking the tech to “fix” an issue that has mysteriously disappeared.
Gary Brawer runs Stringed Instrument Repair in San Francisco. His many clients include Joe Satriani, Metallica, and Neal Schon.
Somewhere Over the Rainbow with Bob Curiano (Nouveau) (WEB EXCLUSIVE)
Bergantino Audio Systems Releases the New B|Amp
Mitchell Guitars Unveils Their FB Series of Basses
Output Announces New Exhale Expansion - Indie Vocals
Native Instruments Introduces Symphony Essentials
This Week in Free Stuff: TR-626 Sounds; BandLab’s Cloud DAW
Mark Gray Synth Solo
How Charlie Christian Defined the Electric Guitar and the Guitar Hero Myth
Is Taylor Swift the New Eddie Van Halen?
Paul Gilbert: â€œWhy My String Gauges Are Changing All the Timeâ€
Vyces Premiere New EP, 'Devils'
Of Mice & Men's Austin Carlile Undergoing Surgery for Health Issues
Megadeth Invite Fans to Celebrate Beer Launch and Dave Mustaine's Birthday at Special Event
Brian May, Battling â€œPersistent Illness,â€ Scraps Remaining 2016 Dates
Michael Anthony Open to Van Halen Reunion, Speaks with Alex for First Time in 10 Years
Configuring Triadic Chord Shapes within the 12-Bar Blues Form
Copyright ©2016 by NewBay Media, LLC. All Rights Reserved. 28 East 28th Street, 12th floor, New York, NY 10016 T (212) 378-0400 F (212) 378-0470